Product Description:
SLR-77 is designed for multi-use plant-wide application for use in all bearing speeds. In most plant operations this grease covers the entire range. It has superior high temperature oxidation and thermal stability, enabling long lubricant life and reducing maintenance frequency.
SLR-77 sharply reduces inventories and lubricant costs. Lubrication intervals are extended resulting in less grease consumption, less down time, and lowered maintenance cost. It provides superior lubrication protection, helping to extend equipment life.
Typical Characteristics
Packaging | 14 ounce cartridges and 48 lb or 120 lb containers |
---|---|
Lubricant | Multi-use synthetic grease |
For Use In | Extreme speed-bearing applications |
Color/Appearance | Blue smooth grease |
NGLI Grade | 2 (ASTM D-1092) |
Worked Penetration | 265-295 (ASTM D-217) |
Dropping Point | None (ASTM D-2265) |
Oxidation Stability (Psi Drop @ 100 hrs) | -1 (ASTM D-942) |
Rust Preventative | 1a (ASTM D-1743) |
Water Washout | 0.9 (ASTM D-1264) |
Extreme Pressure (Timken OK Load Kg (Lb) | 36+(80) (ASTM D-2509) |
Four Ball Wear | 0.5mm (ASTM D-2266) |
USDA Rating | H-2 |
Flammability | NFPA Flammability Rating: 1 |
Toxicity | NFPA Health Rating: 1 |
Vapor Pressure | N/A |
Vapor Density | N/A |
pH | NDA |
Flash Point | H2S, CO, CO2, and SOX |
Autoignition | NDA |
Upper & Lower Flammability Limits | N/A |
Boiling Point | N/A |
Freezing Point | N/A |
Melting Point | N/A |
Application Temperature Range | 20°F (-29°C) to 446°F (230°C) |
Solubility | Solubility in hydrocarbon solvents; insoluble in water |
Specific Gravity | 0.89-0.90 @ (15.6/15.6C) |
Evaporation Rate | N/A |
Viscosity | 3-4 cSt @ 100°C |
Percent Volatile (VOL) | N/A |
Material Stability | Stable |
Extinguishing Media | CO2, Dry Chemical, Foam, Water Fog |
Conditions to Avoid | N/A |
Incompatibility with other Materials | May react with strong oxidizing agents, such as chlorates, nitrates, peroxides, etc. |
Shelf life | 2 years |
Storage Recommendations | Do not use in high pressure systems near flames, sparks or hot surfaces. Keep container closed. |
Safety Measures | Avoid prolonged or repeated inhalation of oil mist above the recommended exposure limit. Use only in well ventilated areas. |