Tech Data
Cond-X 100
| Shelf Life | 2 years |
|---|---|
| Net weight per can | 15 ounces (425 grams) |
| Spray pattern | Stippled or quilted effect |
| Packaging | 15 oz Aerosol cans in cases of 2, 6, 12 or 24 |
| Drying time | 5 minutes |
| For use on | Copper, Stainless Steel, Brass, Black Iron, Galvanized metal, and PVC pipe |
| Water resistant | Yes |
| Paintable | Yes, once fully cured |
| Contains CFCs | No |
| Application temperature | 40°F to 95°F |
| Flash point | ~114°F |
| Flammability | Non-flammable when dry, spray is extremely flammable |
| Toxicity | Low |
| Color | White |
| Odor | Slight solvent odor while curing |
| Specific gravity | 1.358 |
| pH | N/A |
| Vapor density | >1 |
| Solubility in water | Slight solubility |
| Total VOC% | ~ 74.5% |
| Stability | Stable |
| Avoid contact with | Strong oxiding agents |
| Storage recommendations | Store in a cool, dry area away from open flame or heat |
| Safety measures | Use spray in a well-ventilated area; avoid prolonged contact with skin. |
Application Instructions:
Ensure that surface is clean and free of dust or dirt by wiping with a dry rag or duster. Protect surrounding surfaces with newspaper, a drop cloth, and/or masking tape. Surface must be completely dry before applying Cond X 100.
Shake can vigorously until agitator is free and continue to shake for one minute. Shake occasionally throughout application.
Apply product with a sweeping motion, holding can 8-10 inches from surface. Use several thin coats, allowing each coat to dry for several minutes between applications. If runs appear, hold can farther from surface while applying.
Cond X 100 dries quickly to a clean, white insulation which is nonflammable when dry. Excellent for repairs or used in conjunction with wrap around, sleeve or foam type insulation.