Asphalt Coated Reinforcing Fabric
#303 Reinforcing Fabric
Reinforces & Strengthens For Long Term Repairs
Use With Any Roof Patching Material
#303 Reinforcing Fabric is a specially designed asphalt saturated fabric that is perfectly suited for strengthening repairs. This asphalt coated reinforcing fabric is built to last, adding longevity to the life of roof repairs. And because #303 Reinforcing Fabric is coated in asphalt, it ensures the best possible cohesion with roof patching materials. #303 Reinforcing Fabric is ideal for strengthening repairs on seams, flashings, gutters, cracks, breaks, and blisters. And the best thing about it is: you can use it with any roof patching material – so you can apply #303 Reinforcing Fabric with the roof cement of your choice.
• Seams • Flashings • Gutters • Cracksn • Breaks • Blisters
Excellent For Use With Our Sentry Seal 100 & #5500 Aluminum Coating
This black, asphalt saturated fabric is a product of superior quality. And because this strong reinforcing material is easy to apply, it makes long-lasting repairs a cinch. Ensure the success of your roof repair and make that needed repair really last by adding in a layer of #303 Reinforcing Fabric. You won’t be sorry you did.
Available In 6 Inch x 50 Foot Rolls
#303 Reinforcing Fabric is available in rolls that are 6 inches wide by 50 feet long. The unit weight is .46 pounds. This asphalt coated reinforcing fabric only has a very mild hydrocarbon odor. Note that #303 Reinforcing Fabric is intended for exterior application only.
Best Possible Cohesion With Roof Patching Materials
Surface preparation is vital in order to achieve optimal adhesion. To prepare the surface, clean off any loose debris and dirt present, and allow any moisture to dry. Add roof cement to the area of defect, extending it to three inches past the area that needs preparing. Center the reinforcing fabric over the defect and spot stick, then press in place. Add a topcoat layer of roof cement. For flashings, spread the roof cement into the defected area and around by three inches on all sides of the crack. Then, press the reinforcing fabric firmly down and coat it with another layer of roof cement. For gutters, remove debris and rust, and dry them out if they are wet. Heavily coat the application area with roof cement and press the reinforcing fabric down firmly into the coating, topping it off with another layer of roof cement. For leaking blisters, slit them in a criss-cross pattern and fold them open, removing any damaged materials. Let the area dry if it is wet and then apply roof cement into the open area with a trowel or putty knife. Close the opening by replacing the criss-cross material and pressing in place. Cover with roofing cement, extending the coating by three inches on all sides of the damaged area. Add the asphalt coated reinforcing fabric, pressing firmly into the roofing cement and adding a topcoat of roof cement to seal.
We at Superior welcome your questions and inquiries. Call us anytime toll free at 800-476-2072