Tech Data
VaporTrax 1100
Typical Characteristics:
| Product | Vapor suppressant for flammable liquids |
|---|---|
| Packaging | 1 gallon container; 4 x 1 gallon case; 6, 35, or 55 gallon |
| For Use On | Flammable liquid spills |
| Application Methods | Applied directly; injected into hose stream; standard eductor |
| Shelf Life | 2 years |
| Flammability | Non-flammable |
| Toxicity | Non-toxic |
| Color | Slightly hazy liquid |
| Odor | Detergent |
| Contains Petroleum Distillates | No |
| Contains Solvents | No |
| pH | 6.9 – 7.5 |
| Specific Gravity | 1.01 |
| Boiling Point | N/D |
| Vapor Pressure | N/D |
| Vapor Density | N/D |
| Flash Point | N/A |
| Solubility | Soluble (in water) |
| Evaporation Rate | N/D |
| VOC Content (% by wt) | <1.00 |
| Stability | Stable |
| Incompatibility | None |
| Conditions to Avoid | None |
| Storage Recommendations | Keep out of reach of children. |
| Safety Measures | Avoid contactwith eyes and prolonged or repeated contact with skin. Use with adequate ventilation. |
Application Instructions:
Agitate this product with enough force to break up the slick, either by mechanical means or by the hose stream action.
For small spills, apply directly to the spill using a hand sprayer and flush area thoroughly with water.
For large spills, inject product into hose stream using standard eductor equipment, diluted to 1 – 3%. Not designed for use with a foam nozzle.
Note: Product does not disperse vapors in closed areas. Do not flush to drains leading to sanitary or storm sewers. For proper disposal guidelines, consult local environmental authorities. Report fuel or hazardous material spills to the proper authorities as per applicable state or Federal laws and regulations.