Tech Data
Ultra Seal 500
| Shelf Life | 2 years |
|---|---|
| Net weight per can | 8 ounces (227 grams) |
| Spray pattern | Pressurized dispenser (no cartridge gun needed) |
| Packaging | 8 oz aerosol cans in cases of 2, 6, 12 or 24 |
| Curing time | Fully cured within 24 hours; optimum strength in 7 days |
| Effective temperature range | -60oF to +500oF |
| For use on | Non-porous surfaces such as ceramic tile, cultured marble, porcelain, glass, plastic and metal, as well as wood and rubber. |
| Weatherproof | Yes |
| Chemical resistant | Highly resistant |
| Flammability | Pressurized propellant is highly flammable. Do not remove rubber plug at the bottom of the container. |
| Toxicity | Low |
| Conductivity | N/A |
| Color | White (mildew resistant) or clear |
| Odor | Slight acetic acid odor while curing |
| Specific gravity | 1.04 |
| pH | N/A |
| Solubility in water | None |
| Total VOC% | <4.0% |
| Stability | Stable |
| Avoid contact with | Strong oxidizing agents |
| Storage recommendations | Store in a cool, dry area away from heat or open flame |
| Safety measures | Apply product in properly-ventilated area. Avoid contact with eyes or skin. |
Application Instructions:
Make sure the surface is dry and clean of all dirt, oil, and tar.
While holding the can at a 45° angle, apply a continuous 1/16” to 1/8” bead between the surfaces. Ultra Seal 500 will begin to cure immediately and will fully cure within 24 hours, reaching optimum strength within 7 days.
Paint will not adhere to this material after it has cured.
This product is not recommended for application on surfaces that will be continuously immersed in water or on highly porous surfaces (such as masonry).