|Shelf Life||2 years|
|Net weight per can||14 ounces (396 grams)|
|Spray pattern||Circular spray pattern|
|Packaging||Aerosol cans in cases of 2, 6, 12 or 24|
|Drying time||30 minutes|
|For use on||Tree wounds and small shrubs|
|Application temperature||Apply above 55°F; effective over a wide temperature range|
|Paintable||Yes; also safe on painted surfaces|
|Contains chlorinated solvents||No|
|Flash point||60°F (of concentrate)|
|Flammability||Extremely flammable spray|
|NFPA rating||Level 3 aerosol|
|Odor||Slight solvent odor|
|Solubility in water||Not soluble|
|Clean up with||Kerosene|
|Avoid contact with||Strong oxidizing agents|
|Storage recommendation||Store in a cool, dry area away from heat or open flame|
|Safety measures||Avoid prolonged or repeated contact with skin. Apply product in properly ventilated area.|
Shake can vigorously before applying. Ensure that the tree wound or pruning is free of dirt or loose debris.
Holding can 12 inches from surface, spray a thin even coat of Pruning Pro. If necessary, reapply several thin coats, building up to the desired thickness. Can be used to seal small cavities or as an overcoat for tree wraps.
To keep spray tip from clogging, invert can and spray short two second bursts once application is completed. Wipe away any spray residue from tip. If further cleanup is needed, dampen a cloth with kerosene to remove overspray.