Tech Data
Dry Trac
| Shelf Life | 2 years |
|---|---|
| Net weight per can | 12 ounces (340 grams) |
| Spray pattern | Circular |
| Drying time | Tack dry in 3-5 minutes |
| Packaging | Aerosol cans or 5 gallon containers |
| For use on | Metals, rubber, glass and most plastics |
| Operating temperature | -110°F – 1050°F (-79°C – 566°C) |
| Resists pressure up to | 100,000 psi |
| Water resistance | Excellent |
| Corrosion resistance | Excellent |
| Contains chlorinated solvents | No |
| Conductivity | Non- conductive |
| Lubricant | Dry |
| Flash point | ~48°F for aerosols; 2°F for bulk liquid |
| Flammability | Flammable spray |
| Toxicity | Moderate |
| NFPA rating | Level 3 aerosol |
| Color | Dark metallic grey |
| Odor | Slight solvent odor |
| Specific gravity | 0.937 for aerosols; 0.85 for bulk liquid |
| pH | N/A |
| Vapor density | >1 |
| Solubility in water | Negligable |
| Total VOC% | 83.7% for aerosols; 45.57% for bulk liquid |
| Stability | Stable |
| Avoid contact with | Strong oxidizing agents |
| Storage recommendation | Store in a cool, dry area away from heat or open flame. |
| Safety measures | Avoid prolonged or repeated contact with skin or eyes. Apply product in properly ventilated area. |
Application Instructions:
Shake can vigorously before applying Dry Trac to metals, rubber, glass or plastics. Ensure that surface is clean and free of all loose rust, dust, oil, and/or old paint. If necessary, use a wire brush or light sanding to dislodge loose particles.
Hold can 8-10 inches away from surface to be treated and apply product with a sweeping motion to ensure thin, even coverage. Wait 3-5 minutes before applying a second coat (if necessary). Once dry, Molybdenium Disulfide micro-particles burnish into metal surfaces to create a dry film that is inert to water, oil, acids, and alkalis.