Technical Data
VistaPatch
Application Instructions
Surface Preparation: Adequate surface preparation is key to successful adhesion of Vista Patch.
To prepare cracks: Use a screwdriver or similar instrument to clean out cracks, removing any dirt and vegetation that may be present. Flush the crack with water and let dry.
To prepare spalled/damaged areas: Clean off spalled or damaged areas, removing any dirt and debris present. Using a wire brush, scrub area completely and rinse off with water.
Application Limitations: The application temperature minimum is 50°F (10°C) and rising. If the temperature is predicted to drop below 50°F (10°C) within a 24 hour period, do not apply. Also, do not apply is rain is imminent or forecasted within a 24 hour period.
Instructions: To apply Vista Patch, use a rectangular trowel or a wide putty knife and spread material flush with adjoining surface, smoothing as you go. Let the repaired area dry/cure for 48 hours before reopening to foot traffic or vehicle traffic. Do not let patch material dry on tools; to clean-up, simply wash with water.
| Packaging |
1 Gallon Pails
|
|---|---|
| Net Weight |
16.4 lbs
|
| Appearance/Color |
Beige liquid
|
| Odor |
Mild
|
| Flammability |
HMIS Rating: 0
|
| Toxicity |
HMIS Rating: 1
|
| Drying Time |
Let dry/cure for 48 hours before reopening to foot or vehicle traffic |
| Flash Point |
N/A
|
| Boiling Point |
212°F (100°C)
|
| Melting Point |
N/A
|
| Minimum Application Temperature |
50°F (10°C) and on the rise
|
| Specific Gravity (Water = 1) |
1.92 |
| Vapor Pressure (mm Hg) |
Nearly equal to that of water
|
| Vapor Density |
<1
|
| Evaporation Rate (Butyl Acetate = 1) |
Approx. 1.8
|
| Coverage Per Gallon |
Dependant on width and depth of repair area
|
| Application Method |
Rectangular trowel or wide putty knife
|
| Clean Up |
Use water on tools before material dries |
| Solubility In Water |
Easily dispersible in the liquid state
|
| Material Stability |
Stable
|
| Extinguishing Media |
Foam, CO2, dry chemical, water fog, other
|
| Conditions To Avoid |
Keep from freezing and extreme heat
|
| Materials To Avoid |
Strong oxidizers
|
| V.O.C |
150 gm/liter (max)
|
| Shelf Life |
2 Years
|