Concrete Sidewalk Repair Patch

• Fills Cracks Up To 1' Wide
• Repairs Spalled Areas Up To 1/4' Deep
• Trowel Grade Repair
• Easy To Use
• Dries Neutral/Sand Color

Vista Patch is an easy to use concrete sidewalk repair patch that is well suited for making repairs that need to be durable and tough. Its 100% acrylic formula serves to make it a dependable, lasting patch. Vista Patch is able to fill cracks that are up to 1 inch wide and can repair spalled and damaged areas that are up to 1/4 inch deep. This crack filler for concrete surfaces is trowel grade and can be applied either by trowel or by wide putty knife. Vista Patch dries a neutral/sand color. This heavy-bodied concrete sidewalk repair patch is the material of choice when cracks or spalled areas need to be mended. Vista Patch is ideal for use on sidewalks, concrete driveways, concrete stairs, patios, pool decks, floors, and more.

 Uses: Sidewalks • Concrete Driveways • Concrete Stairs • Patios • Pool Decks • Floors • And More

Don’t let your cracked or spalled concrete surfaces have the last word; Apply Vista Patch today and return those concrete areas to their prime condition. This thick concrete sidewalk repair patch is the tough, reliable material that makes trusted repairs to damaged surfaces that are unsightly and unsafe. It isn’t difficult to use, and the results are excellent.

Vista Patch Is Available In 1 Gallon PailsVista Patch is available in 1 gallon pails. The approximate coverage range per 1 gallon pail is varies based on the width and depth of the area to be repaired. As far as drying time is concerned, it is recommended that 48 hours be allowed to pass before opening the repaired area to foot traffic or vehicle traffic. The unit weight is 16.4 pounds. Do not freeze or store at temperatures below 50°F (10°C). Note that Vista Patch is intended for exterior application only.

100% Acrylic Formula | Heavy-Bodied Repair Material Tough, Lasting, & Dependable | Makes Durable Repairs

Adequate surface preparation is key to successful adhesion of Vista Patch. Use a screwdriver or similar instrument to clean out cracks, removing any dirt and vegetation that may be present. Flush the crack with water and let dry. Clean off spalled or damaged areas, removing any dirt and debris present. Using a wire brush, scrub area completely and rinse off with water. The application temperature minimum is 50°F (10°C) and rising. If the temperature is predicted to drop below 50°F (10°C) within a 24 hour period, do not apply. Also, do not apply is rain is imminent or forecasted within a 24 hour period. To apply Vista Patch, use a rectangular trowel or a wide putty knife and spread material flush with adjoining surface, smoothing as you go. Let the repaired area dry/cure for 48 hours before reopening to foot traffic or vehicle traffic. Do not let patch material dry on tools; to clean-up, simply wash with water.