|Flash Point|| |
|Application Temperature|| |
|Dry Time|| |
Foot Traffic after 10min, Heavy Traffic after 1hr
|Slip Resistance|| |
|Mix Ratio|| |
1:1 by volume
|Shelf Life|| |
Two years in unopened container
Dual Cartridge System, 2 Gallon, 10 Gallon
|Storage Conditions|| |
Store dry at 40°F (4°C) – 95°F (35°C)
425 g/L VOC unmixed, 5.5 g/L VOC cured
|Application Method|| |
Dual cartridge system or tube application dispenser
ASTM D-4541-95 Standard
|Cures By||Air drying & self crosslinking|
|Cautionary Hazards||Contains MDI isocyanates, aliphatic polyamines and |
aromatic petroleum solvents.
|Incompatibility (Materials To Avoid)||Avoid contact with water, |
metal compounds, amines, strong bases, strong acids and alcohols
and all sources of ignition.
For hairline cracks, simply fill in the crack using the cartridge dispenser. Always discard the initial portion that may not be properly mixed before starting to fill the crack. For larger spalled area patching, wet the surface area using the tube application dispenser and then fill the spalled area to floor level with DRY sand. Finally, saturate the sand with additional liquid and smooth out using a marginal trowel.
Apply in shade or at time of day to avoid high surface temperatures or direct sunlight. (Recommended application temperature range is 20° - 90°F).
1. Do not apply to new concrete less then 30 days old.
2. Do not pour unused material back into original container. Product will be damaged if this occurs.
3. Avoid exposure to standing water for 24 hours.
NOTE: FOOD AREAS: remove any exposed food or food products from area where CretePro 500 is being applied and while product is drying.
REFER TO MATERIAL SAFETY DATA SHEET FOR FURTHER SAFETY AND HANDLING INFORMATION.
See individual labels for more caution statements.
KEEP OUT OF THE REACH OF CHILDREN
Refer to the standard test methods below for further information:
ASTM D 4258-83 Standard Practice for Surface Cleaning Concrete for Coating
ASTM D 4259-83 Standard Practice for Abrading Concrete
ASTM D 4260-83 Standard Practice for Acid Etching Concrete
ASTM D 4262-83 Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces