Chemical Resistant Epoxy Wall Coating
Verta Kote 2000
Epoxy Coating For Vertical Masonry Surfaces
Creates A Porcelain Like Finish For Long Term Protection
• High Gloss • Chemical Resistant
• Abrasion Resistant • Non Yellowing
• No Toxic Fumes
Verta Kote 2000 is a Non Blushing, 100% Solids Epoxy Coating Designed For Use On Vertical Masonry Surfaces. Verta Kote 2000 Has Excellent Chemical and Abrasion Resistance. See Color Chart For Available Colors. Verta Kote 2000 is recommended for use on all exterior and interior masonry walls.
Verta Kote 2000 has Excellent Chemical & Corrosion Resistant Properties
Tough & Rugged For Industrial and Commercial Applications
Waterproofs and Weatherproofs
Verta Kote 2000 is Ideal for: Industrial Restroom Block Walls • Interior Block Walls • Exterior Block Walls • Pre Cast Masonry Panels Etc.
Note: On new concrete block applications, two coats of water based block filler are recommended prior to application of Verta Kote 2000. This procedure will help eliminate excessive consumption of Verta Kote 2000.
Not Available In Clear
Standard Colors: Grey, Red, And Tan (See Color Chart)
Custom Colors Are Available – Consult Tech Service For Minimum Quantities
Not Recommended For Use Over Control Joints or to Latex Modified Concrete
Verta Kote 2000 is a non sag, 100% solids epoxy coating designed for use on vertical masonry surfaces. This chemical resistant epoxy coating is recommended where a chemical and abrasion resistant product is preferred. It is considered a non blushing epoxy and provides long term protection on interior and exterior vertical surfaces. Verta Kote is non yellowing and considered a high gloss epoxy coating.
A masonry wall coating, Verta Kote 2000 is not recommended for use on latex modified concrete or over working control joints. This epoxy coating is available in several standard colors. (see color chart) As a masonry wall coating, Verta Kote 2000 can be used on pre cast masonry panels, concrete block and other masonry surfaces where a hard and cleanable epoxy coating is desired.
Verta Kote 2000 is an excellent epoxy wall coating for coating restroom block walls. This coating provides for a non porous surface that is cleanable and can even be pressure washed when desired. This durable and non porous coating helps prevent bacteria growth and also reduces objectionable odors found in many public restrooms.
As a chemical resistant epoxy coating, Verta Kote 2000 is also an excellent coating for many industrial applications. The coating has outstanding resistance to chemical fumes and enhances light reflectance. In addition, Verta Kote 2000 resists abrasion and provides a long term coating on masonry surfaces.
When using an epoxy wall coating and coating concrete block, a block filler is recommended before using Verta Kote 2000. Using a block filler seals the porous areas of block and reduces the amount of epoxy coating required. Verta Kote 2000 is mixed one part resin to one part catalyst and has a pot life of approximately 35 to 40 minutes. Two kit sizes are available, 2 and 10 gallon. A ½” nap dynel roller cover is recommended for applying Verta Kote 2000. This method is recommended for exterior as well as interior applications.
No other masonry wall coating is as tough and durable and as cleanable as Verta Kote 2000. It can be cleaned using a pressure washer and strong detergents to remove soot, grease and much more.