High Build Resurfacing Epoxy

100% Solids • Seamless & Stops Bacteria Growth

• Excellent Chemical Resistance
• Worn & Eroded Concrete Floors

Epoxy Kote 300 is a premium high solids, two component, epoxy coating and binder. This clear high build resurfacing epoxy is intended for applications that call for medium to heavy thickness, as it provides 12-20 mils of thickness after one coat. Epoxy Kote 300 is low odor producing and offers superior resistance to chemicals and abrasion. This high solids coating naturally dries clear with a high gloss; however, if desired, a wide range of colors may be achieved by mixing in epoxy color additives. Epoxy Kote 300 provides good clarity and color retention. This high build resurfacing epoxy meets the USDA’s requirements for use in meat and poultry establishments and is easy to apply with a ¼ inch notched squeegee.

Epoxy Kote 300 is ideal for use in areas that are subject to chemical spills or abrasion, as well as anywhere easy cleaning, smoothness, and cosmetic appearance are significant considerations. 

Epoxy Kote 300 is excellent for use on Warehouse floors, garage floors, production areas, tool rooms, break rooms, bathroom floors and locker room floors. This high build resurfacing epoxy is easy to apply and EASY TO CLEAN. It will not harbor bacteria as does bare concrete or grouted tile floors. Odors in restrooms are reduced drastically.

Medium To High Build After One Coat | Easy To Apply

In order to ensure the best possible adhesion to the floor, we highly recommend that you use Superior Industries’ #1107 Epoxy Primer before applying Epoxy Kote 300. #1107 Epoxy Primer is a two component, low viscosity epoxy primer that forms a tough but flexible film. This high solids primer offers excellent penetration and superior adhesion. It is moisture tolerant and stress relieving, featuring very low VOC’s, low tensile modulus, and high tensile elongation. #1107 Epoxy Primer is very resilient and will bring about strong adhesion when used in concert with Epoxy Kote 300. #1107 Epoxy Primer is available in both 3 gallon kits and 15 gallon kits.

Use With #1107 Epoxy Primer

The Epoxy Kote 300 is available in both 3 Gallon Kits and 15 Gallon Kits. The 3 gallon kit has an oversized resin container for easy mixing; The 15 gallon kit requires mixing in a separate container. The approximate coverage range of Epoxy Kote 300 is 80-130 sq ft (7.4-12 sq m) per gallon at 20-12 mils per coat. Note that the actual coverage of this epoxy coating will vary based on how porous the floor is and whether or not a primer is used. Epoxy Kote 300 is a clear liquid, but it can be used in conjunction with epoxy color additives if pigmentation is desired.

Available In 3 Gallon Kits & 15 Gallon Kits

Two Components: Resin & Hardener

Instructions:  We recommend that you thoroughly read all application instructions on the product label before applying Epoxy Kote 300. Because surface preparation is important to successful adhesion, be sure the application surface is sound, clean, level, and dry before you begin application. If applying to a brand new epoxy floor, the surface must be sufficiently cured and at least 60°F (15.5°C). The mixing ratio by volume is two parts resin to one part hardener (2:1 by volume). If using with an epoxy color additive for pigmentation, follow mixing directions on the additive’s product label. If using the 3 Gallon Kit, pour the hardener (Part “H”) into the can of resin (Part “R”). If using the 15 Gallon Kit, pour a ratio of two parts resin to one part hardener in a clean mixing container. Mix with a low speed jiffy mixer for 2-3 minutes or until fully blended. Mix only what will be used within the product’s pot life. Apply after mixing by pouring a ribbon-like bead onto the application surface and spreading evenly with a ¼ inch notched squeegee. Back roll with a 3/8 inch nap roller and after 10 minutes roll with a plastic loop roller or porcupine roller to remove all remaining bubbles. Protect the freshly coated floor from water, dampness, and condensation for at least one full day. Recoat within 12 to 24 hours, or, if more than 24 hours has elapsed, screen the surface before adding further coats. Do not apply Epoxy Kote 300 if the surface temperature is not between 60°F (15.5°C) and 85°F (30°C). Do not use a thinner. Do not immerse this high build resurfacing epoxy or use where moisture can get in below the resurfacer. Epoxy Kote 300 is not intended for use on exterior, on-grade substrates.