|
|
 |
|
Dyna GlazeWall and Ceiling Treatments
100% solids reinforced/resinous wall and ceiling surfacing
 |
DYNA GLAZE is the peerless wall and ceiling system that combines the proven strength of reinforcing fiberglass with a 100% solids, thermosetting, high build resin system. The installed result is a seamless, high performance wall and ceiling finish. DYNA GLAZE is resistant to harsh chemicals and physical abuse. The system also provides solutions for the many requirements associated with high performance areas, including expensive maintenance costs. | |
|
Two types of DYNA GLAZE are available:
-
RM – RM is the standard DYNA GLAZE selection. It utilizes special fiberglass cloth and thermosetting resins that are 100% solids. Typical RM application thickness is 21 to 35 mils DFT.
-
NR – NR is the DYNA GLAZE system that utilizes 100% solid thermosetting resins without the fiberglass reinforcement. NR is recommended for ceilings where abuse is minimal. Typical NR application thickness is 6 to 10 mils DFT. |
| ADVANTAGES: |
- Joint-free surfacing provides vapor barrier
- Maximum impact & chemical resistance
- May be applied to a variety of substrates
- Good abrasion resistance - superior to other ceiling treatments
- Not affected by most temperature variations
|
- Easily cleaned and decontaminated
- No static cling
- USDA approved, accepted by the Canadian Department of Agriculture
| |
|
|
| TYPICAL USES: |
- Pharmaceutical & cosmetic manufacturing facilities
- Health care facilities
- “Clean room environments” for pharmaceutical, animal research & electronic facilities
- Commercial kitchens, dishwasher & waste disposal areas
|
- Food & beverage processing facilities
- Operating rooms, scrub rooms, intensive care & therapy rooms
- Class 10 to Class 1,000 performance areas
- High impact walls in racquetball courts
| | | |
| | |
|
|
