Tech Data
Energy Star Kote
| Packaging | 1 Gallon Pails & 5 Gallon Pails |
|---|---|
| Net Weight | 11.3 lbs; 55 lbs |
| Appearance/Color | White liquid |
| Odor | Mild |
Flammability | HMIS Rating: 0 |
| Toxicity | HMIS Rating: 1 |
| Protection | 10 years |
| Drying Time | Dry to the touch in 2-3 hours |
| Recoat Time | A second coat can be applied after 6-8 hours |
| Recommended Coats | 2 |
| Flash Point | N/A |
| Boiling Point | 212°F (100°C) |
| Melting Point | Not determined |
| Minimum Application Temperature | 60°F (15.5°C) and on the rise |
| Specific Gravity (Water = 1) | 1.30 |
| Vapor Pressure (mm Hg) | Nearly equal to that of water |
| Vapor Density | >1 |
| Evaporation Rate (Butyl Acetate = 1) | Essentially the same as water |
| Coverage | Approx. 50-75 sq. ft. per gallon (per coat) |
| Application Method | Soft brush, high pressure spraying, ¾” nap roller |
| Meets ASTM D6083 | Yes |
| Clean Up | Use water on tools before material dries |
| Solubility In Water | Easily dispersible in water, in the wet state |
| Material Stability | Stable |
| Extinguishing Media | Water spray, foam, dry chemical, carbon dioxide |
| Materials To Avoid | N/A |
| V.O.C | 100 gm/liter (max) |
| Shelf Life | 2 Years |
Application Instructions
Proper surface preparation is important to ensure optimal adhesion. Clean the roof of all debris, dust, and dirt. Remove any mildew, oil, grease, rust, or other foreign substances on the roof’s surface. Let fresh asphalt roofs cure for at least 4 weeks before applying Energy Star Kote. Scrub the roof down with a bleach solution (1 part chlorine bleach to 3 parts water) or roof cleaner. Rinse and let dry. For EPDM roofs, it is especially important to make sure all debris (including embedded clay) is removed if proper adhesion is to be achieved. On EPDM roofs, pressure wash the whole surface (using a wide tip to prevent tears) after scrubbing with bleach solution or roof cleaner. Let dry. To apply, thoroughly stir the pail (do not dilute!) and apply via soft brush, high pressure spraying (Tip Size: .021 to .025), or ¾' nap paint roller. Apply a second coat for added durability, warranty purposes, and optimal performance. Do not allow material to dry on tools; for clean-up, simply wash with water. The application temperature minimum is 60°F (15.5°C) and rising. If the temperature is predicted to drop below 60°F (15.5°C) within a 24 hour period, do not apply. Also, do not apply is rain is imminent or forecasted within a 24 hours period. If the area is one in which fog or dew is prone to accumulate in the evening, coat in the morning and complete by early afternoon in order to prevent wash off (which occurs if fog, dew, or rain moves in before the coating is dry).