|Packaging||Cases of 2, 6, 12 or 24 cans|
|Can Size||16 Ounce|
|Net Weight||12 ounces|
|For Use On||Asphalt, Concrete, Plastic, Rubber, Stucco, Wood, Fabric, or Masonry|
|Application Methods||Aerosol spray|
|Drying Time||Approximately 10 minutes|
|Coverage||Approximately 15 square feet|
|Application Temperature||40 – 90°F|
|Appearance||Light gray liquid|
|Shelf Life||2 years|
|Boiling Point||136 – 232°F|
|Vapor Density||> 1.0|
|Vapor Pressure||60 – 70 (aerosol)|
|VOC Content (% by weight)||60.0 – 64.0|
|Evaporation Rate||> 1.0|
|Specific Gravity||1.37 – 1.41 (liquid)|
|Extinguishing Media||Water, foam, carbon dioxide, dry chemical|
|NFPA Rating||Level 2 aerosol|
|Conditions to Avoid||Extreme temperatures|
|Incompatibility||Avoid contact with strong oxidizers|
|Storage & Handling Recommendations||Store in a cool dry place away from heat, sparks or open flames at temperatures above 120°F.|
|Safety Measures||Avoid contact with skin and eyes or excessive or prolonged inhalation. Keep out of reach of children.|
Before applying, test ReflectaKote in an inconspicuous area. Remove any debris, rust, grime, grease, dust, wax, or dirt from the surface. Protect the surrounding area from overspray with tape, a drop cloth, or newspapers.
Shake can well. Hold it at least 10 – 12” from the surface to be treated and apply ReflectaKote in short bursts as a fine mist spray. Spray a thin coat with overlapping strokes. For larger areas, apply product in several thin coats.
Do not over apply. Be sure that temperature is between 40 – 90°F. Surface will dry in approximately 10 minutes.
After each use, clean nozzle by inverting can and depressing the button until valve clears.